IMA Water arsenic filters are fully assembled with the possibility of designing steel frame water treatment plants combining several filtration systems (removal of arsenic, iron, manganese, sand - flint, activated carbon, softeners, etc.).

Arsenic removal filters with manual multivalve head have a wide range of applications in drinking water and wastewater.  The manual valves refer to the face-to-face operation of the backwashes of the arsenic filtering system in water, being an advantage in cases where the control of maintenance and the minimum presence of electrical failures are required.

Manufacturing data of a manual arsenic filter

• Connection
  • 1" inch filters diameter (330 mm)
  • 2" inch filters diameter (410 ,550 mm)
• Working temperature 0ºC to 35ºC
• Maximum working pressure 150 psi.
• Limits of use:
  • Recommended PH: 6.5
  • High amounts of sulfates, arsenates, phosphates and silicates. May create screen and reduce performance
  • Full water analysis recommended. A 2-stage system may be necessary

Equipment included in the arsenic removal filters manual control head

• Body made of fiberglass reinforced polyester.
• Manual or automatic valves according to customer's request.
• Inlet and outlet pressure gauges to control the pressure loss during washing.
• All our filters come with the load and filtering bed included.
• Maximum working pressure 8 bar.
• Working temperature 0 to 35 ºC.

Contact us without obligation by phone or email for any technical advice or purchase of our equipment.